DIN DEFINITIONS
(DINs 1 - 1470)

For additional DINs click the link below:
(DINs 1471 - 74361 and Non Standard Fasteners)

DIN 1 — Taper Pins

DIN 7 — Dowel Pins

DIN 84A — Slotted Cheese head machine screws

DIN 84 Z1 — Slott. cheese hd assem. scrs. w/capt. f/w

DIN 85 A — Slotted pan head machine screws

DIN 93 — Tab washers with long tab

DIN 94 — Cotter pins

DIN 95 — Slotted oval head machine screws

DIN 96 — Slotted round head wood screws

DIN 97 — Slotted flat head wook screws

DIN 103 — Acme threaded rod

DIN 124 — Round head rivets

DIN 125 A — Flat washer without chamfer

DIN 125 B — Flat washer with chamfer

DIN 126 — Flat washer without chamfer

DIN 127A — Split lock washer with bend ends

DIN 127 B — Split lock washer with flat ends

DIN 128 A — Split spring washers, curved

DIN 128 B — Split spring washers, waved

DIN 137 A — Spring washer, curved

DIN 137 B — Spring washer, waved

DIN 186 A — Tee-head bolts with square head

DIN 188 — Tee-head bolts with double nip

DIN 258 — Taper pins with external thread

DIN 261 — Tee-head bolts

DIN 302 — Countersunk head rivits

DIN 315 — Wing nuts

DIN 316 — Wing screws

DIN 404 — Slotted drilled fillister head screws

DIN 417 — Slotted set screws with full dog pTaper pins

DIN 427 — Slotted headless screws

DIN 431 — Jam nut, hexagonal

DIN 432 — External tab washer

DIN 433 — Flat washer with reduced O.D.

DIN 434 — Square bevel washer: 8%

DIN 435 — Square bevel washer: 14%

DIN 436 — Square washer

DIN 438 — Slotted set screw with cup point

DIN 439 A — Hexagon nuts - 0,5d unchamfered

DIN 439 B — Hexagon nuts - 0,5d chamfered

DIN 440 R — Round washers for wood constructions

DIN 443 A — Sealing push in caps

DIN 444 A — Eye bolts

DIN 462 — Internal tab washers

DIN 463 — Tab washers with long and short tab

DIN 464 — Knurled thumb screws

DIN 465 — Slotted knurled thumb screws

DIN 466 — Knurled nuts, full

DIN 467 — Flat knurled nuts

DIN 470 — Sealing washers

DIN 471 — External retaining rings

DIN 472 — Internal retaining rings

DIN 478 — Square head bolts

DIN 479 — Square head bolts

DIN 480 — Square head bolts

DIN 525 — Weld studs with hexagon nuts

DIN 529 A — Anchor bolts (stone bolt)

DIN 529 B — Anchor bolts (stone bolt)

DIN 529 C — Masonry bolts with hexagon nuts

DIN 529 D — Anchor bolts (stone bolt)

DIN 529 E — Foundation bolts with hexagon nuts

DIN 529 F — Anchor bolts (stone bolt)

DIN 546 — Slotted round nuts

DIN 547 — Round nuts with drilled holes in one face

DIN 548 — Round nuts with set pin hole in side

DIN 551 — Slotted set screws with flat point

DIN 553 — Slotted set screws with cone point

DIN 555 — Hexagon nuts - 0,8d

DIN 557 — Square nuts

DIN 558 — Fully threaded maching bolts

DIN 561 B — Hexagon set screw with full dog point

DIN 562 — Square thin nuts

DIN 564 — Hex set scew w/half dog pt. and cone end

DIN 571 — Hexagon lag screws

DIN 580 — Lifting eye bolts

DIN 582 — Lifting eye nuts

DIN 601 — Hexagon bolts with hexagon nuts

DIN 603 Mu — Carriage bolts with hexagon nuts

DIN 604 — Flat countersunk nip bolts with hex nuts

DIN 605 — Flat countersunk square neck bolts

DIN 607 Mu — Round head nip bolts with nuts

DIN 608 — Countersunk square bolts (short neck)

DIN 609 — Hex fitting bolts w/long threaded portion

DIN 610 — Hex fitting bolts w/ short threaded portion

DIN 653 — Flat knurled thumb screws

DIN 660 — Round head rivets

DIN 661 — Countersunk head rivets

DIN 662 — Mushroom head rivets

DIN 674 — Oval (Bracier) head rivets

DIN 675 — Flat countersunk head rivets

DIN 705 A — Shaft collars

DIN 787 — T-bolts for machine-tool table-slot

DIN 792 — Cylindrical countersunk screws

DIN 797 — Special foundation bolts

DIN 798 — Special foundation nuts

DIN 833 — Stud for cast iron

DIN 834 — Stud for cast iron

DIN 835 Fo — Studs, tap ends - 2d

DIN 836 — Stud for aluminium

DIN 906 — Hexagon socket pipe plugs

DIN 907 — Core plugs

DIN 908 — Hexagon socket screw plugs

DIN 909 — Hexagon head pipe plugs

DIN 910 — Hexagon head screw plugs

DIN 911 — Hexagon socket screw keys

DIN 912 — Socket head cap screws

DIN 913 — Socket set screws with flat point

DIN 914 — Socket set screws with cone point

DIN 915 — Socket set screws with dog point

DIN 916 — Socket set screws with cup point

DIN 917 — Hexagon cup nuts - low pattern

DIN 920 — Slotted pan head screws, small head

DIN 921 — Slotted pan head screws with large head

DIN 922 — Pan head screws with small head and dog point

DIN 923 — Slotted pan head screws with shoulder

DIN 924 — Oval head screws with dog point

DIN 925 — Flat head screws with dog point

DIN 926 — Slotted headless screws with full dog point

DIN 927 — Slotted shoulder screws

DIN 928 — Square weld nuts

DIN 929 — Hexagon weld nuts

DIN 931 — Hexagon cap screws partially threaded

DIN 933 — Hexagon cap screws fully threaded

DIN 933 Sz — Hexagon cap screws with slot

DIN 934 — Hexagon nuts - 0,8d

DIN 935 — Castle nuts

DIN 936 — Hexagon jam nuts

DIN 937 — Hexagon thin slotted and castle nuts

DIN 938 — Studs, tap end - 1d

DIN 939 — Studs, tap end - 1,25d

DIN 940 — Studs, tap end - 2,5d

DIN 960 — Hex cap screws, metric fine thread - part thread

DIN 961 — Hex cap screws, metric fine thread - full thread

DIN 963 A — Slotted flat head machine screws

DIN 964 A — Slotted oval head machine screws

DIN 965 A — Cross recessed flat head machine screws

DIN 966 A — Cross recessed oval head machine screws

DIN 970 — Hex nuts style 1, prod. grade A+B

DIN 971/1 — Hex nuts style 1, metric fine thread

DIN 971/2 — Hex nuts style 2, metric fine thread

DIN 972 — Hex nuts style 1, product grade C

DIN 975 — Threaded rods

DIN 976 B — Full threaded studs

DIN 979 — Thin slotted and castle nuts

DIN 980 V — Self-locking nuts; all metal conctruction

DIN 981 — Lock nuts for rolling bearings

DIN 982 — Self- locking nuts w/nylon insert: heavy series

DIN 983 — External retaining rings with lugs

DIN 984 — Internal retaining rings with lugs

DIN 985 — Self locking nuts w/locking insert: standard series

DIN 986 — Self locking domed cap nuts with nylon insert

DIN 988 — Shim washers

DIN 1151 B — Flat head nails

DIN 1433 — Clevis pins without head

DIN 1434 — Clevis pins w/out hold for split pins

DIN 1435 — Clevis pins with small head

DIN 1436 — Clevis pins with large head

DIN 1440 — Flat washers with clevis pins, medium

DIN 1441 — Flat washers for clevis pins, coarse

DIN 1443 — Clevis pins without head

DIN 1444 — Clevis pins with head

DIN 1445 — Clevis pins with head and threaded portion

DIN 1469 — Grooved pins half length grooved

DIN 1470 — Grooved pins full length parallel grooved

For additional DINs click the link below:
(DINs 1471 - 74361 and Non Standard Fasteners)